Are you wondering whether your bandsaw needs a fence? Well, if you are only making the curved cuts on your bandsaw, you are not likely to need a bandsaw fence. But for ripping and resawing, a good quality fence is a necessity. And since no one uses the bandsaw only for making the curved cuts, they certainly need a fence. Bandsaw fences are great for making straight cuts and they provide better accuracy. To experience the full potential of your bandsaw you need the best aftermarket bandsaw fence.
The problem with high-quality bandsaws is, most of the time they don’t come with the fence. Though few companies are giving one pre-attached fence with their saw, well, they are not the best. So, it is obvious that you need an aftermarket bandsaw fence for ripping or resawing. Our 5 of the best aftermarket bandsaw fence reviews and the buying guide will help you pick the right one.
Our Favorite Best Aftermarket Bandsaw Fence 2021
Top 5 Best Aftermarket Bandsaw Fence:
1. Kreg KMS7200 Bandsaw Fence
Most of the bandsaw blades don’t get perfectly perpendicular to the saw table. Even when you are using a fence, there’s just always a bit of drift that doesn’t allow you to get precise cuts. The Kreg KMS7200 Bandsaw Fence easily adjusts to the drift angle of your blade to give you a great level of accuracy. A bandsaw that allows you to do such a wide variety of cuts doesn’t come often. With two simple adjustments, you can set the fence to match blade drift which will greatly enhance your cutting accuracy.
You can also change the fence to a low-profile position to move the blade guide closer to the workpiece. Plus, the fence can accept Kreg stops or re-saw guides for use in additional applications. The thin red line on the Precision lens cursor is easy to read even for the smallest of adjustments and it also features magnified reading to provide comfortable viewing which allows you to accurately set up the fence for exact measurements.
The KMS7200 is a versatile bandsaw fence that can be attached to most of the 14″ bandsaws. It is so much organized that it can be used just right out of the box and you can also modify it to set it on other bandsaws.
You don’t require any tools to remove the fence, you can just remove it in seconds when you are done. All you have to do is loosen the locking knob then lift the fence from the mounting rail. And the mounting rail is positioned below the surface of your table so it won’t get in the way of your cutting tasks.
This fence is made of aluminum and it is built to last for years to come. It is incredibly straight and strong. The top and side of the fence have slots for adding stops and re-saw guides. This fence also includes an adhesive-back measuring tape, Kreg heavy-duty trak and much more.
- Easy to use
- Made from high-quality material
- Provides great precision
- You need to modify the bandsaw fence to attach it with some saw models
2. Woodhaven 7280 Bandsaw Fence
If you have 14-inch bandsaw from any of these well-known companies such as Jet, Powermatic, Ridgid, and Porter cable, the 7280 Bandsaw Fence from Woodhaven will be the perfect choice for it. It will easily fit most of the 14-inch bandsaw table as well as 16-inch square tables. You might even be able to fit it to other 14-inch bandsaws by drilling holes.
Because of its array of futuristic features, the Woodhaven bandsaw fence is a great deal to get. It is made from high-quality material which makes it sturdy enough to last for a long time. And these are the aspects that make it one of the best bandsaw fence on the market.
Installing the fence is easy. If you have a bandsaw from any of the before mentioned companies, all you need to do is put the fence right through the slots. It will match perfectly to the screw hole. It is also easy to adjust vertically and for drift.
The rear and front ratchet handle solidly lock the fence. The bandsaw fence comes with two lock systems to provide you the most accurate measurement and it also has two blades lead locks making it one of the most rigid fence for bandsaw. And you can get numerous fence positions because the aluminum rail can freely slide when not locked.
- Easy to use
- Strong construction
- Compatible with most of the popular companies’ 14-inch bandsaw
- Need modification for using it in different bandsaw models
3. RIKON 13-900 14-Inch Bandsaw Fence
The RIKON 13-900 14-Inch Bandsaw Fence is designed to be used with the RIKON 10-320 14-inch bandsaw. This fence also features a resaw bar to help you with resawing. This 14-inch bandsaw has a rear glide rail and cam-lock lever that will give you superb control as well as help you get the most elegant cuts.
This fence comes with all the necessary hardware for mounting it to the bandsaw. It works very well and fits perfectly. It shouldn’t take more than 5 minutes to install it. You can also adjust the fence for blade drift.
And that’s not all, the fence also comes with multiple adjustments for drift and squaring 90-degrees to the table. You can easily make precise cuts with the magnified cursor and easy-to-read scale, these features will help you to complete your woodworking project effectively and efficiently. You can get accurate measurements all the time without any hassle.
It is a value for money fence and it is adjustable to the point that you will be very satisfied.
- RIKON 13-900 is perfectly designed for RIKON 10-320 14-inch bandsaw
- You can use it for multiple tasks
- Easy to use
- Not compatible with different bandsaw models
4. POWERTEC BS900RF Rip Fence
Powertec is a popular brand that produces quality products. Any search for the best aftermarket bandsaw fence is not complete without looking at what Powertec has to offer.
While the Powertec BS900RF Rip Fence is a perfect fit for use with Powertec BS900RF woodworking bandsaw, it is also designed to fit and firmly clamp on any bandsaw with11-3/4 table.
This durable fence is made of industry-grade aluminum. It is designed to get the job done every time. The Powertec BS900RF is a rugged, ultra-convenient and dependable tool, it ensures that you have the backing you need to get perfectly straight parallel cuts. Your straight cutting experience will never be the same with this upgrade.
Handy cam-lever provides secure placement lock and hassle-free adjustment, providing the utmost in rigidity and dependability. This feature helps the user to have the ultimate cutting experience with great precision. This pre-assembled model is ready to be used right out of the box. And it only weighs 13.4 ounces so, storing and handling it is also easy. With precise cuts and high-performance sawing, this product also offers user safety qualities.
- Easy to install
- Easy to use
- Durable yet lightweight
- Capable of delivering perfect rip cut
- Not suitable for 14-inch bandsaw
5. CARTER MAGFENCE II Universal Magnetic Fence
One of the best aftermarket bandsaw fences in our review is the CARTER MAGFENCE II. It is very well-known for its compatibility. This universal bandsaw fence uses two high-quality magnets to hug tightly on the table made of ferrous metal. Regardless of size, it easily and quickly magnetically attaches to most ferrous metal tables because there are no mounts or brackets required for attachment.
So, before you purchase the Carter Magfence II, you need to ensure that your saw has a ferrous metal made table. Most of the bandsaw tables are made of steel, cast iron or aluminum sheet. The steel and cast iron are the most common ferrous metal where the aluminum is the opposite. So, if you are using a table made of aluminum, you may skip this fence and consider some others compatible with your bandsaw model.
The Carter bandsaw fence has two powerful magnets attached to it and the fun part is, they are switchable. And you can have them wherever you want on the table. It will give you the precise measurement which will help you achieve the accurate cuts.
Just like attaching it, removing it is also easy. This universal fence is ideal for use with your bandsaw and nearly any other tool with ferrous metal surfaces such as drill press, spindle sander.
- Easy to use
- Compatible with all bandsaw tables that are made from ferrous metal
- This fence features with a multiple T-slots
- You cannot attach it to an aluminum table
Buying Guide for Best Bandsaw Fence:
In the bandsaw context, a fence is a component that is fixed on the table in a direction parallel to the blade. A bandsaw fence is a piece of essential equipment as it helps the user achieve straight cuts. You are most likely to get the workpiece ruined if you don’t use the best aftermarket bandsaw fence. And if you get the one that is not meant for your saw, you can’t even set it on your saw. So, before purchasing an aftermarket bandsaw fence, it is important to know what you need to consider to purchase the best one for you.
The construction material of your desired bandsaw fence should be the first thing you take your eyes on. A bandsaw fence can be made of different materials like the fence for table saw. Steel and aluminum are some of the commonly used materials to do that job.
Aluminum alloy would be a great choice for the building material of your desired bandsaw fence because it is one of the strong metal you can get on the fence.
Steel is also a robust material but the downside with steel is they might catch rust soon. And they are comparably heavy too.
The material that builds the best aftermarket bandsaw fence is very important, as some workpieces can be very tough. Only the best materials can withstand many years of bumps and maintain their rigidity and flatness.
Just like saws, all the fences are also different from each other. Each fence is unique and designed for a specific saw. Because of their different design and dimensions, you won’t be able to use the same extension on different saws. So, before selecting the aftermarket bandsaw fence, you have to find out whether it will be compatible with your saw or not. However, in our best aftermarket bandsaw review, you will find fences that are able to hug many different kinds of bandsaw.
If you want to get the accurate straight cut on your bandsaw using a fence, you need to place it in the right place and then lock it down. Different companies offer their own special lock system. Among them, cam lock and magnetic lock lever systems are most popular.
The magnetic lock system is quite easy and simple to handle. On the other hand, the lever of the cam lock is a bit tricky. That’s why people often pick a magnetic lock over a cam lock system.
However, don’t rush into ordering a magnetic lock system just yet, because there is another thing you need to know first. A magnetic fence is only compatible with saws that have a table made of ferrous metal.
Size really matters for a bandsaw fence. Consider the tasks you will do regularly with the saw to determine the ideal size. Ideally, larger saws need larger fences and vice versa. And your bandsaw size and the fence needs to match or else you cannot install it on the saw.
A good clamping mechanism promotes accuracy. It makes sure that the bandsaw fence remains in the fixed position despite vibrations or knocks that may occur.
You shouldn’t ignore the price aspect when choosing the best aftermarket bandsaw fence. Pick a unit that is affordable, but does not compromise functionality. As a rule of thumb, don’t choose extremely cheap units or else you might have to return to the market very soon for a replacement. Select a price range that is suitable for you and compare units within it. Then pick the one that is most suitable for you.
Frequently Asked Questions (FAQ):
- Is it necessary to have a fence on the bandsaw?
– A fence helps the user to make straight cuts easily and smoothly. It is almost impossible to get precise cuts without a fence.
- Why should I consider doing resawing and ripping with a fence?
– Using a bandsaw with a fence is the best way to achieve quality cuts. With greater cuts, you also waste less wood. Nevertheless, the biggest advantage of a fence is the prevention of rocking and sliding when you are making cuts.
- Which material is the most common for the aftermarket bandsaw fence?
– As we have mentioned in our buying guide aftermarket bandsaw fences are made of different materials. Some are reliable where some are poor. Some of the most commonly used materials in the market are aluminum, steel, and plastic. Because of its unmatched strength, steel is the benchmark. However, aluminum alloy is also preferred by some users as it is lightweight and robust. Plastic fences are not as good as fences made of these materials.
- Can I use a table saw fence on the bandsaw?
– Every saw needs the specifically designed fence to hug it properly. And as the table saw and bandsaw are different from each other, you cannot use a table saw fence on the bandsaw fence or a bandsaw fence on the table saw fence for that matter.
Every bandsaw needs a good fence. After all, a bandsaw can do much more than just cutting curves. Getting the best aftermarket bandsaw fence will help you ensure that your straight cuts are precise and up to standard. From the above-mentioned product reviews, you already know that these fences have great features to provide you a great and convenient cutting experience.
If you still think, your bandsaw doesn’t deserve a fence, think again. There are many products available on the market. But we have come up with 5 of the best aftermarket bandsaw fence to make your purchasing process easier. And we hope our buying guide and reviews of the product will help you choose the best one for you. And remember to choose the one that is compatible with your bandsaw.
- Best Woodworking Bandsaw Reviews: Making Your Bevel Cuts Easily
- Best Table Saw Under 1000 Reviews and Buying Guide
- Best Hybrid Table Saw Reviews and Buying Guide