Best Track Saw 2021 (Your A-Z Guide on Track Saws)

While track saws weren’t in the spotlight for quite some time, they’ve made a comeback after homeowners decided to take matters into their own hands. What I mean is- after people using DIY methods for small to medium projects, the gigantic table saw fell out of favor.best track saw review

The track saw, on the other hand, emerged as the more beginner-friendly version of table, radical, miter saws. If you’re already familiar with circular saws, having the best track saw at your disposal will increase your cutting accuracy by a hefty margin.

I’m going to present a comparative breakdown of the 8 best circular saw track systems (ergo, track saws) that I’ve used over my years as a professional. Not only that, in this top-rated track saw review, I’ll share my personal buying tips to help you navigate through the shadowy maze of countless saws.

Let’s get right to it!

Compare Our Favourite Choice Track Saws 2021

IMAGEDESCRIPTIONPRICE
BEST OVERALLMakita SP6000J Plunge Circular Saw
Makita SP6000J 6-1/2-Inch Plunge Circular Saw
Editors Ratings: (4.6/5)
  • Weight: 16.98 pounds
  • Motor: 12A
  • Warranty: 1 Year
  • Dimensions: 16 x 12 x 13 inches
  • Speed: 5200 RPM
Check latest price
Read Full Review
BEST CORDLESSDEWALT DCS520T1 Circular Saw
DEWALT DCS520T1 FLEXVOLT 60V MAX Circular Saw
Editors Ratings: (4.5/5)
  • Weight: 12.05 pounds
  • Warranty: 3 Year Limited Warranty
  • Dimensions: 12 x 10 x 10 inches
  • Speed: 4000 RPM
  • Voltage: 60Volts
Check latest price
Read Full Review
Best ProfessionalFestool 575387 Plunge Cut Track Saw
Festool 575387 Plunge Cut Track Saw
Editors Ratings: (4.6/5)
  • Weight: 7.69 pounds
  • Warranty: 36 Mo. Service All Inclusive
  • Dimensions: 39.5 x 29.5 x 32.5 inches
  • Wattage: 1200 Watts
  • Voltage: 120Volts
Check latest price
Read Full Review
BEST FOR MONEYKreg ACS2000 Adaptive Cutting System Saw
Kreg ACS2000 Adaptive Cutting System Saw + Guide Track Kit
Editors Ratings: (4.5/5)
  • Weight: 7.98 pounds
  • Motor: 12 AMP
  • Dimensions: 9.1 x 9.1 x 9.1 inches
  • Wattage: 1560 Watts
  • Bevel capacity: 1° to 47°
Check latest price
Read Full Review
BEST FOR WOODWORKFestool 575388 TS 55 REQ Track Saw
Festool 575388 TS 55 REQ Track Saw
Editors Ratings: (4.9/5)
  • Guide rail
  • Micro-adjustable depth controls
  • Spring-loaded riving knife
  • FastFix system
Check latest price
Read Full Review
PREMIUM PICKBosch GKT13-225L Track Saw
Bosch GKT13-225L Track Saw
Editors Ratings: (4.3/5)
  • Weight: 10.2 pounds
  • Dimensions: 14.4 x 9.5 x 9.45 inches
  • Warranty: 1 year manufacturer
  • Voltage: 120 Volts
  • Blade Length: 6.5 Inches
Check latest price
Read Full Review
Light ProjectsSHOP FOX W1835 Track Saw
SHOP FOX W1835 Track Saw
Editors Ratings: (4.0/5)
  • Weight: 12.69 pounds
  • Dimensions: 10.63 x 13.38 x 9.5 inches
  • Voltage: 120 Volts
  • Speed: 5500 RPM
  • Amperage Capacity: 9 Amps
Check latest price
Read Full Review
Beginner FriendlyTriton TTS1400 Plunge Track Saw
Triton TTS1400 Plunge Track Saw
Editors Ratings: (3.9/5)
  • Weight: 6.5 pounds
  • Warranty: Limited 12-month
  • Dimensions: 13.19 x 9.25 x 9.84 inches
  • Voltage: 110 Volts
  • Wattages: 1400
Check latest price
Read Full Review

Track Saw Buying Guide (Tips to Find the Best Circular Saw Track System)

Before preparing this best track saw review, I used and compared different track saws to understand what each saw brings to the table. Every time I took up a track saw certain considerations were always in the back of my mind.

You can think of it as the “golden features.” If you want to get a top-notch track saw, some research (actually a lot of) is necessary. And this buying guide I’ve compiled can be an excellent starting point.

best circular saw track system

Maximum Speed

The first thing that you want to know is the speed of the track saw. The speed determines how fast you can complete your work irrespective of the amount of work that you have to clear up.

It is measured in revolutions per minute (RPM) and will be higher depending on the power and the motor capacity. Higher speed means faster cutting time. The standard motor power is 12-Amp, and the RPM rating is around 3500+.

It’s not like you can’t handle heavy-duty projects with a low RPM rating. You just need some hands-on experience to get it done.

Besides, compared to a circular saw, track saws have variable speed settings. You can adjust between different speeds to get optimum results.

Bevel Capacity

Another thing that you need to know is the ability of the saw to make deep and bevelled (angled cuts). If you want to become a seasoned woodworker (even if you’re a DIY), knowing and understanding the ins and outs of bevel cuts are essential.

Each track saw has a different set of bevel ranges. The standard range you should look into is 1-47 degrees. This range will allow the right amount of flexibility for a wide range of cuts.

Also, look for multi-sided bevel adjustments. It means- the bevel can be adjusted and the final adjustment clamped from both sides of the track saw. The two-side adjustment-and-lock system will give you a cleaner cut.

A Motor that Keeps on Cutting

Like I mentioned above, motor power is vital at determining the speed of the track saw. It is also important when it comes to bringing the track to life or get it kicking, so to speak.best plunge cut track saw

Make sure that you have a high-end motor. This way, you’ll get maximum power to achieve the best speeds for your cut. Besides, a quality motor will not face burnout in the face of long and challenging tasks.

When I wanted to work for long hours and didn’t want the motor to get exhausted, I always took out the FESTOOL 575387.

Corded or Cordless

A cordless track saw comes with a battery pack to store charge. Corded models get their power right from the power outlet. The best thing about cordless models is that you have more freedom of movement. However, their power will reduce as the battery capacity goes down.

The corded model, on the other hand, guarantees continuous power supply and constant cutting power. However, their freedom of movement is limited to the length of the cord. Make a choice on your ideal model.

It’s a similar dilemma you face when choosing between a corded or a cordless circular saw model. You either choose constant power or movement liberty. There is no right or wrong answer here.

It depends on what project you have in hand and whether a cordless or a corded variant will be better for the task.

Durability

No matter what power tool I talk about, durability will always have a place on things you should consider before buying. A durable track saw gives back the value for your money.

The sturdiness of the track saw that you’re eying out probably would depend on the material used to construct the saw’s body. I would put my money on metal-magnesium alloys.

Metal is the king of durability. However, magnesium is a close second with more flexibility because of its extremely light nature.

Dust Blower/Extraction System

dust blower

When you’re out with your track saw or circular saw on your first day, sawdust won’t faze you. Like the brave young warrior, you would march into the job site shrouded with thick dust.

Anyways, that hopeful glimmer will die after a few weeks of living and breathing in the sawdust. That’s why a track saw with a proper dust blower/extraction system is important. If you get a shop vac to boot, your worksite will remain dust-free.

This feature is not a big concern for users who want to use the track saw occasionally. However, if you want constant performance from the track saw and yourself, the environment you work in needs to be clean.

So, think about the frequency with which you’re going to use the track saw, and choose accordingly.

Length of a Track Saw Guide Rail

Guide rails are what set track saws apart from other types of saw. Guide rails are used in tandem with track saw systems to help users get an accurate finish. However, if the guide rail is short, you’ll have to join a few pieces together.

There is no harm in doing that, but if done poorly may leave you with unwanted results. For instance, if you go through with a cut once and have to reassemble the track again, chances are, your accuracy will falter.

Instead of joining multiple guide rails, I would recommend looking for a longer guide rail capacity to get a continuous straight line of cut.

The standard length is 55-57 inches. If you need more length, you always have the option to either connect tracks or get a separate long rail of 106 inches.

Kickback Protection

Make sure that your track saw also comes with the best kickback protection mechanism. You may feel tempted to ignore this altogether, but it’s important that you take safety into account.

Different track saws have their own way of ensuring reduced kickback. Keep an eye out for electronic brake technology, load compensation, or any other anti-kickback feature.

A powerful anti-kickback mechanism will allow you to work for hours on end without noticeable fatigue and will prevent injuries as well.

Guide Rail/Track Compatibility

If the track saw is not compatible with the guide rail you have, you just have a plunge saw without a guide for accurate cuts.

Without a compatible guide rail, you won’t be able to make the most out of the track saw. So, if possible, get the product-specific guide rail or track system that comes along with the saw.

Perhaps you would have to shell out a few extra bucks, but the convenience is worth the expense. Still, you don’t always have to use product-specific guide rails.

For example, a DeWalt track saw doesn’t necessarily need a DeWalt guide rail. I used the DeWalt DCS520T1 with my Festool track without any issue whatsoever.

So, you have two options here. Either get a product-specific guide rail or get a separate track that’s compatible with the track saw you have.

You’ll find the compatibility details in the manufacturer’s notes. Check out my review of circular saw guide rails to get a comprehensive understanding of saw-to-rail compatibility.

Track Saw Blades

track saw bladeWhat is the size of your saw blade? How easy is it to fit or to remove? Is your saw blade forged from durable or substandard materials? You should ask yourself these questions when you think about track saw blades.

I would suggest you look for carbide blades. They will last longer. In addition to that, having a larger blade ensures that you get faster cuts and save time. That’s why I prefer the 6.5-inch blade over the 4-inch blade.

The blade length will also determine the depth of cut you get from the track saw. Just remember this rule of thumb- the bigger the blade, the better the cut depth.

Track Saw Adapter

track saw adapter

The question I face often is whether you can use any other type of saw with a guide rail. I understand- it’s a reasonable question. A lot of my neighbors and friends have circular saws but don’t want to get a dedicated track saw just to improve accuracy. If you’re in the same league, you can always try out a track saw adaptor.

A track saw adaptor would help you use other saws on a guide track. Whether it’s a worm drive, a sidewinder, or a table saw- the adaptor has you covered. However, the performance will not be up to the standard of a dedicated track saw with guide rails.

Still, it’s a decent trade if you want to use your existing saw as a track saw to get precise cuts. Be mindful of the adapter to saw compatibility before you buy.

Safety Features

I’ve briefly touched on the subject of safety in the kickback protection section. Still, safety is a key concern when power tools come into play. That’s why I’ve decided to revisit safety features once again.

Apart from the anti-kickback mechanism, there are other safety features you should look into as well. To name a few- a solid blade guard, a trigger lock, dust extraction, and track saw clamps (more on clamps later).

All these features will make sure that your track saw is safe to use. However, you need to take necessary precautions as well. Never forget to use the recommended safety gears.

Always use both hands when operating the saw. Finally, do not use the saw when you feel tired or dizzy.

Cutting Capacity

Two factors should be considered in determining track saws cutting capacity—the depth of cut and the bevel options. A standard depth is 2-1/8 inches at 90-degrees. So, if you keep the track saw straight, it should go 2-1/8 inches deep without a hiccup.

However, the cut capacity also depends on the blade size. No matter how powerful your track saw is, without the right sized blades, you won’t get your desired cut depth.

Another concern that also includes the blade is the type of cut you want. If you’re looking for rip cuts, a big blade with low teeth count is ideal. However, cross-cut lovers should go for blades with high teeth count. The higher the teeth count is, the finer the cross cuts will be.

Cord Length

This feature is often ignored. However, cord length can play an important role when it comes to freedom of movement. You understand where I’m going with this, right?

The longer the cord is, the more you can move around the workshop without having to worry about losing connection. A long and stomp-proof cord will allow you to use the track saw comfortably.

The standard cord length for track saws is 10-feet. However, if you need more, there are track saws on my list that have 12-13 feet cords.

Track Clamps

Clamps are somewhat of a safety feature. I’ve used track saws without clamps, and a lot of people do it on a regular basis. However, a beginner should always consider getting track clamps for increased safety.

What track clamps do is that it keeps the guide rail in place. Trust me- it makes the cuts really comfortable. Although I admitted to using track saws without clamps, I put on clamps whenever I get the chance.

Why work harder on keeping my hands steady when the clamps can get it done for me?

Miter Capabilities

The miter capability of a track saw is dependent on the saw’s bevel capacity. Let’s say the bevel capacity of a given track saw is -1-47 degrees. So, that’s the miter capability you have for that particular track saw.

Still, getting miter cuts with a track saw requires patience and practice. You need to go to your drawing board (literally) and figure out how you’re going to get the ends of the lumber to connect. It takes a lot of time and effort to get a proper miter cut.

So, if you want quick miter cuts, nothing can replace the miter saw. However, with enough time in your hand and experience in the bag, you can perform a reasonable miter cut with a track. And yes- a miter gauge will be a big help.

Track Saw vs. Circular Saw

The first time I came across the question of whether to choose a track or a circular saw, I was confused. In my eyes, both saws had different purposes. So, I didn’t understand why people were pitting the track saw against the circular saw.

However, what I realized over time is that both these power tools have so much in common it’s natural to ask which one is the better option? Well, the answer isn’t that simple.

The track saw, also known as the plunge saw, excels at delivering accurate, splinter-free, straight-line cuts. Circular saws, on the other hand, are portable, lightweight, and give users simple yet efficient cross-cuts.

It’s not as if the track saw isn’t versatile. If anything, the track saw is the master of versatility. You can perform rip cuts, cross cuts, miter cuts, plunge cuts, and even angular cuts with this power tool.

So, where is the key difference?

The circular saw doesn’t come with a guide track/rail. So, if you’re not a seasoned veteran, chances are, you’re going to mess up the cut line. So, straight-line rip cuts with a circular saw take practice to perfect.

The track saw, however, can be attached to the guide rail. If you clamp the guide rail on your workboard, you can get a clean, straight-as-an-arrow cut even if you’re a beginner.

Still, the decision boils down to the user’s needs. If you prefer straight, accurate, and long cuts, a track saw will be a viable option. A circular saw is a preferred tool for people who want short, bite-sized cuts that don’t require a lot of precision.

The argument isn’t over yet. If you want to know all the nitty-gritty differences between these two highly sought-out saws, read my in-depth article where I break it all down for you.

Track Saw vs Table Saw

The other equally heated but a little less popular battle is between the track vs. table saw. Again, these two saws serve distinct purposes. However, the similarities between both the power tools are also aplenty.

That’s why people often wonder which saw would be a better fit for their workshop. I’m not going to go into the details here.

Instead, I’ll give you some quick tips with the help of which you can understand what type of saw will suit your needs.

Table saw is a monster of a tool. If you want to perform heavy-duty rip cuts (emphasis on heavy), there is no alternative to the table saw. It can keep on cutting without you having to reset or adjust the machine over and over.

Besides, it can handle tough-to-crack lumber with ease. Also, the table saw is more durable because of the mammoth-like size and superior construction.

A track saw is the king of versatility. With a track saw, you can do a clean rip cut that you would otherwise perform with a table saw.

However, you have to reset the saw after each cut and bring it back to the starting position. Still, if you have the time to spare, you can use a track saw to get almost the same performance as a table saw.

If you want to know more, you can jump into another article where I discuss the track and table saw in detail.


Top 8 Best Track Saw Reviews 2021

Here is a list of the select few track saws I deem worthy! From here on out, there will be a comprehensive track saw comparison to show you the key difference between each tool.

This way, it’ll be easy for you to figure out which track can come in handy for your next project.


1Makita SP6000J1 Plunge Track Saw

Makita SP6000J1 Plunge Track Saw
GLOBAL RATINGS:
(4.8/5)
ACCURACY:
(4.6/5)
EASY TO USE:
(4.6/5)
LIGHT WEIGHT:
(4.6/5)
avarage :
(/5)

I didn’t get the Makita SP6000J1 as a track at first. To me- it was just another circular saw. However, once I needed more accuracy for cross-cutting some large pieces, I got the entire guide rail joining set. The point is- this track saw is the personification of flexibility.

The MakitaSP6000J1 has got a lot of things going for itself. You can get it as a circular saw if you want to, or you can get clamper attachments if you shell out a few extra bucks. More importantly, you can get the complete track saw kit for circular saw as well. This incredible flexibility is what makes this track saw a multi-purpose tool.

The 12-Amp motor has enough power to deliver speeds, ranging from 2000 to 5200 RPM. There is a speed control dial on the other side of the blade from where you can adjust the setting. With a 6-1/2-inch carbide-tipped blade, 2.188-inches is the highest cut depth you can get.

best track sawThe circular saw’s body has a magnesium construction. While it does compromise durability just a bit, this 75% lighter-than-steel material makes the track saw highly portable.

Besides, the guide rail system is made of anodized aluminum. So, the blades will remain steady as you cut through whatever lumber or wood comes in front of you.

The bevel capacity is not too shabby either. The range extends from -1-degrees to 45-degrees (22.5 and 45 are the positive stops). So, I always had the liberty to perform a number of complex cuts with the saw.

In short, the Makita SP6000J1 is an excellent track saw. You can use it as a circular saw, a plunge/track saw, or add clamper sets to keep it in place. And yes- there’s a 1-year warranty! The sheer versatility of this track saw is why it takes first place on my list. If you want to know more about this track saw, read my detailed Makita SP6000J1 review.

SPECIFICATION
BRAND:Makita
WEIGHT:‎16.98 pounds
DIMENSIONS (INCHES):75 x 14.75 x 24.25
SPEED:5200 RPM
MOTOR:12.0 AMP
POWER SOURCE:Hardwire
Pros
  1. Splinter-free finish
  2. Large cutting capacity
  3. Portable track saw
  4. Variable speed
  5. Ideal for cutting large wood
Cons
  1. Do not expose to wet conditions

2DEWALT FLEXVOLT Circular Saw

DEWALT FLEXVOLT Circular Saw
GLOBAL RATINGS:
(4.6/5)
ACCURACY:
(4.4/5)
EASY TO USE:
(4.5/5)
LIGHT WEIGHT:
(4.3/5)
avarage :
(/5)

Although the Makita was enough to satisfy most of my track saw needs, I couldn’t help but try out a DeWalt cordless track saw. I tried out a few models. However, the DeWalt FLEXVOLT DCS520T1 had what it takes.

While not as powerful as the Makita SP6000J1’s 5200RPM, the FLEXVOLT has a decent RPM rating of 4000. It packs enough punch to handle different lumber types. However, the low rotations will cause some issues when facing off against plywood, typically for A-B grades.

Still, in most cases, the cuts I got from this track saw were smooth and splinter-free. You just have to work around some lumber types to get the most out of this tool.

There’s an anti-kickback mechanism that works relentlessly in the background. You’ll feel the difference once you get your hands on this track saw. Even after working for hours on end, the fatigue wasn’t more than I could handle.

The highest cut depth is 2-1/8th inch- not really different from the Makita SP6000J1 (almost identical). However, the bevel capacity ranges from 1-47 degrees. So, you can get some smooth bevel cuts without any hiccups.Best Cordless Track Saw

The crowning piece of this track saw (something that Makita SP6000J1 doesn’t have) is the built-in dust blower. When you’re working with lumber, a lot of sawdust is a natural byproduct. Well, the dust blower will take care of more than 85% of it. If you attach a shop vac, you won’t even need to clean the worksite afterward.

Finally, this track saw is cordless. So, there is always the option of taking it out for a run, even when you have no access to a power source. I got similar flexibility of movement I usually get from the cordless circular saws I have around my workshop.

If you get the full package- the saw, the guide rail, and the clamp, the cost is $100 more than the Makita track saw. However, the $100 extra can pay dividends in the long run because DeWalt provides a stunning 3-year warranty.

The DeWalt FLEXVOLT is a top-notch track saw with a few shortcomings, of course. The only issue is the thick blades. You need to understand how they go into the wood to get a feel for this saw. Also, you can’t use blades from other manufacturers apart from the specific DeWalt track saw blade.

SPECIFICATION
BRAND:Dewalt
WEIGHT:‎12.5 pounds
DIMENSIONS (INCHES):12 x 10 x 10
VOLTAGE:‎60 Volts
SPEED:4000 RPM
POWER SOURCE:Cordless
WARRANTY:‎3 year
Pros
  1. 1 to 47-degrees bevel capacity
  2. 4000 RPM provides enough power
  3. Splinter-free cuts
  4. 1 to 47-degrees bevel capacity
  5. No cords attached- portable
Cons
  1. Guide rails need clamps to stick to the surface
  2. Users need some practice to work with high-grade plywood

3Festool 575387 Plunge Cut Track Saw

Festool 575387 Plunge Cut Track Saw
GLOBAL RATINGS:
(4.8/5)
ACCURACY:
(4.6/5)
EASY TO USE:
(4.7/5)
LIGHT WEIGHT:
(4.3/5)
avarage :
(/5)

Soon after using the DeWalt DCS520T1, I realized that I’m in need of something compact and portable. I have a limited workspace; so, I was in urgent need of a smaller yet powerful enough track saw. This had led me to the FESTOOL 575387, which turned out to be a great addition to my project.

First of all, the track saw is compact and weighs only 7.69 pounds. However, the small size doesn’t mean that it lacks strength or power. It has a maximum rpm rating of 5200, which starts from 2000 and without any load speed.Best Professional Track Saw

On the other hand, the cutting depth with and without the guide rail (not included) is 1.96 and 2.16, respectively. It has great bevel capacity, which ranges from -1° to 47° with positive stops at 45° and 0°.

I had precise control of the cuts due to the two-lined micro-adjustable depth indicator. Additionally, the plastic splinter guard made sure that there was no tear-out. I had less to no kickback while working because of the riving knife that kept the cut kerf open.

SPECIFICATION
BRAND:Festool
WEIGHT:‎7.69 pounds
DIMENSIONS (INCHES):39.5 x 29.5 x 32.5
VOLTAGE:‎120 Volts
WATTAGE:‎1200 watts
POWER SOURCE:Ac
WARRANTY:36 Mo.
Pros
  1. Adjustable Rpm ranging from 2000-5200
  2. Splinter guard to eliminate tear-outs
  3. It has 9 blade types and two different sizes
  4. Riving Knife reduces the chance of sudden knockbacks
Cons
  1. The saw guide rail and blades are expensive
  2. The dust port connections won't work without Festool hoses

4 Kreg ACS2000 Adaptive Cutting System Saw + Guide Track Kit

 Kreg ACS2000 Adaptive Cutting System Saw + Guide Track Kit
GLOBAL RATINGS:
(4.7/5)
ACCURACY:
(4.3/5)
EASY TO USE:
(4.5/5)
VALUE FOR MONEY:
(4.3/5)
avarage :
(/5)

Who doesn’t love a good underdog story, right? With the top-tier brands hovering over the tool industry, a few less popular brands come out and blow you away. Similarly, the Kreg ACS2000 is a track saw that caught me by surprise.

For starters, the ACS2000 has a competitive price point. It has a lot of high-end features, but the cost is reasonable. That’s what makes this track saw stand out from the crowd.

Besides, it has a standard 2-1/8-inch cut depth. So, I didn’t have issues cutting through different types of lumber. Even at 45-degrees (half the max range), the cut depth is 1-1/2. It’s quite useful for a lot of different woodworking tasks.Best Track Saw for the Money

The 12-Amp motor delivers up to 6000RPM, and you can tune it down to 2000RPM if necessary. There is a neat electronic brake that prevents kickback during operation.

I was also impressed with the bevel capacity of this track saw, which ranges from -1 to 47-degrees. The cut remains smooth even when you’re beveling with the saw.

Usually, I had to spend around $500-$700 to get the best circular saw track system. However, a guide rail, a carrying bag, and a whopping 62-inch guide track are included in this track saw for less than $500. If you ask me, the Kreg ACS2000 is a bang for the buck.

SPECIFICATION
BRAND:KREG
WEIGHT:18 Pounds
DIMENSIONS (INCHES):9.1 x 9.1 x 9.1
CUT DEPTH:2-1/8-inch
GUIDE TRACK:included
MOTOR: 12 amp
RMP: 2000-6000
BEVEL CAPACITY:-1 to 47 degrees
WARRANTY:2-year
Pros
  1. It is the best budget track saw
  2. Easy to use and handle
  3. Smooth straight and bevel cuts
  4. Adjustable RPM
  5. Sturdy aluminum construction
  6. Anti-slip guide track included in the box
  7. 2-year warranty
Cons
  1. Can't attach blades from other manufacturers
  2. Needs some practice to get fine cuts

5Festool TS 55 REQ Track Saw (Best Track Saw for Woodworking)

Festool TS 55 REQ Track Saw
GLOBAL RATINGS:
(4.7/5)
ACCURACY:
(5.0/5)
VERSATILITY:
(5.0/5)
EASY TO USE:
(4.8/5)
avarage :
(/5)

The 5th track saw on my list (not to be looked down upon) is the Festool 575388 TS 55 REQ. You can see that I’ve already listed one track saw from Festool. Still, I couldn’t help but put this on the list because of the results I got. Undoubtedly, it is a top contender for the title of best circular saw track system.

Like the other top models, this one also comes with some excellent, user-friendly features. The saw comes with a guide rail (included with the track saw) for precision cuts. The guide rail allows you to have laser-straight and splinter-free cuts.

I’m not exaggerating. Festool’s guide rails stick to the surface, outperforming other guide rails from high-end brands.
With this saw, you can get the best micro-adjustable depth controls. The micro-adjustable depth indicator of this saw gives you a set of two cursor lines that maximizes your precise material processing when working on or off the guide rail system.Best Track Saw for Woodworking

However, if you want irregular cuts, I would suggest looking into some band saws.

It is integrated with the spring-loaded riving knife. This track saw keeps your cut kerf open and the other material away from your blade’s rear end. As such, it reduces your chance of getting a kickback and improves user control.

Blade changes are equally easier and safer since the saw model offers the FastFix system, which enables you to lock the switch and the arbor simultaneously for easy arbor bolt removal.

Specifications
BRAND: FESTOOL
GUIDE RAIL:55 INCHES
STYLE:‎REQ PLUNGE CUT TRACK CIRCULAR SAW
INCLUDED COMPONENTS:BARE-TOOL
Pros
  1. Splinter-free cuts
  2. Precise material processing
  3. Eliminates kickback
  4. Maximizes user control
  5. Easy arbor bolt removal
Cons
  1. Needs routine cleaning

6Bosch GKT13-225L Track Saw

Bosch GKT13-225L Track Saw
GLOBAL RATINGS:
(4.4/5)
ACCURACY:
(4.4/5)
EASY TO USE:
(4.3/5)
VALUE FOR MONEY:
(4.2/5)
avarage :
(/5)

For the users who want the best track saw without necessarily spending so much, Bosch GKT13-225L Track Saw can be their go-to option. It’s not as budget-friendly as Makita or Kreg track saw I’ve mentioned above. But considering the performance, this Bosch track saw USA is a decent bargain.

Unlike most track saw systems, this model is light and weighs just about 10 pounds. It is electric-powered, and the dimension is 14.4 x 9.5 x 9.45 inches.

The track saw is affordable if you consider the performance and uses the same size blades as the models that I’ve mentioned earlier. It’s got a heavy-duty RPM rating of 6250. So, you can use this track as an alternative to table saws.Best Premium Track Saw

The track saw provides a fast and easy setup with a one-step clean finish cut. Its plunge mechanism allows for precise plunge cuts with a highly accurate depth of cut. In my opinion, the track saw itself (without the guide track) has the potential to be the best plunge saw.

The saw comes with a single bevel pivot point. However, you’ll have to buy a track separately when you need to use one. While you can try guide rails from a different manufacturer, I would recommend using the Bosch circular saw guide rail for maximum efficiency.

One very important feature that this saw offers its users is overload protection. This technology will protect the motor from overheating and burnout.

Additionally, you will get an efficient dust extraction technology that works best when connected to a vacuum cleaner.

SPECIFICATION
BRAND:BOSCH
WEIGHT:‎10.2 pounds
DIMENSIONS (INCHES):14.4 x 9.5 x 9.45
VOLTAGE:‎120 Volts
BLADE LENGTH:6.5 Inches
WARRANTY:1 year
Pros
  1. Best for longer work
  2. Compact
  3. Easy to store
  4. Precise cuts
  5. Comfortable grip
Cons
  1. Shallow user manual

7SHOP FOX W1835 Track Saw

SHOP FOX W1835 Track Saw
GLOBAL RATINGS:
(4.0/5)
VALUE OF MONEY:
(4.3/5)
ACCURACY:
(4.1/5)
LEIGHTWEIGHT:
(3.6/5)
avarage :
(/5)

I was still searching for quality track saws for my budget-hunter friends out there. Trust me- getting decent performance while cutting corners on expenses can be tough. However, I was adamant about making this best track saw review comprehensive. I kept searching and came across the SHOP FOX W1835 Track Saw.

At 11lbs, this saw is a bit heavier than the other track saws on this list. However, it has a compact, user-friendly design and measures around 10.63 x 13.38 x 9.5 inches in exact dimensions.

Besides, this electric-powered track saw comes with a powerful motor. Once the motor kicks in, the saw reaches maximum speed in a few seconds.Best Track Saw for Light Projects

It uses the normal 120-Volt power capacity and produces up to 5500 RPM in no time. What I didn’t expect is the blade rim speed to be about 9070 feet per minute. I thought 5500 RPM would produce less blade speed. But I believe the design of this SHOP FOX track saw somehow enhances the performance.

With minimum blade size of 160mm diameter and an arbor of 20mm, this is the best track saw for quick but less demanding tasks. Despite the blade speed, the maximum cut depth is 1-31/32-inches. So, you can’t handle heavy-duty projects with this tool.

If you want to perform some intricate angular cuts, the miter saw should be right up your alley.

Also, the saw does a great job of keeping the job site clean. The 1-1/2-inch dust port system makes the dust collection a breeze, provided you have a shop vac to attach it with.

SPECIFICATION
BRAND:Shop Fox
WEIGHT:‎12.79 pounds
DIMENSIONS:10.63 x 13.38 x 9.5
VOLTAGE:120 Volts
SPEED:5500 RPM
CORD LENGTH:‎6 Feet
Pros
  1. Compact design with ergonomic handle
  2. High blade speed
  3. Best for less demanding jobs
  4. Suitable for longer use
  5. Portable
Cons
  1. Not ideal for very large timber

8Triton TTS1400 Plunge Track Saw

Triton TTS1400 Plunge Track Saw
GLOBAL RATINGS:
(4.0/5)
ACCURACY:
(4.1/5)
VALUE FOR MONEY:
(4.3/5)
LIGHT WEIGHT:
(3.4/5)
avarage :
(/5)
SPECIFICATION
BRAND:Triton
WEIGHT:6.5 Pounds
DIMENSIONS (INCHES):13.19 x 9.25 x 9.84
VOLTAGE:‎110 Volts
SPEED:‎5300 RPM
WARRANTY:‎Limited 12-month
Pros
  1. Fast blade-change
  2. Soft-grip handle
  3. Plunge lock safety system
  4. Easy to follow user guide
  5. Easy to store
Cons
  1. The track is sold separately

 


Benefits Of A Track Saw

What delicacies does a track saw bring to the plate? Is it worth the big bucks? Why should you even consider it?

These questions are some of the first ones that crop up in a person’s mind. That’s why I’m going to outline the benefits of a track saw to give you a clearer picture of what awaits in store for you.

benefits of a track saw

Highly Portable

The crowning feature of a track saw is portability. You can move it around the worksite as long it’s connected to a power source. If you get a cordless track saw, you don’t need to worry about staying near a power outlet.

So, while the track saw is more portable compared to a table and miter saw, it’s even easier to move around with a circular saw. However, a circular saw offers a limited number of cuts.

With a track saw, you can perform all the different cut types you want, provided you have sufficient experience of using a track saw.

Industrial-grade Performance

A track saw can run for hours on end without any burnout. I’ve used the track saws I have for a whole day and faced no issue at all.

Most track saws have an industrial-grade design. That’s why these power tools don’t just give up when push comes to shove.

Besides, you can perform a wide range of cuts with the track saw. Whether it’s a miter cut, rip cut, plunge cut, or angular cut- the track has got you covered.

Built-in Dust Collection System

Not all track saws have this feature. However, all the mid to high-end track saws should have a built-in dust blower. So, I would recommend looking for a track saw that has a dust blower.

It’ll help you keep the annoying layers of thick dust at bay. A dust blower is part of the puzzle. While the blower can shoot sawdust out like a pro, it won’t collect the dust.

Getting a shop vac and attaching it with the blower end is what makes the dust extraction foolproof.

Fits in Confined Spaces

Another amazing benefit of the track saw is how it fits even in the tightest spaces. Thanks to the compact size and design of this tool, the track saw can enter places where other saws will never fit.

The size of the track saw allows users to get close-to-wall cuts, which isn’t possible with other bulkier saw types.

Versatile and Clean Cuts

The sole purpose of the track saw is to give you accurate cuts. If accuracy isn’t a concern, a circular saw is a better alternative.

Anyways, the guide track/rail will give you considerable precision. The cuts you get will be splinter-free and clean.

Even the bevel adjustments of the track saw can give you excellent angular cuts. So, it’s not only the best quality cuts. It’s the wide variety of cuts that makes the track saw a kickass power tool.

Long Cuts

As I’ve mentioned earlier, track saws are used in isolation or with a track system. If you use a track saw with the recommended guide system, performing long cuts become a cakewalk.

All you have to do is just adjust the guide rail, place the saw, and hit the trigger. It’s that simple. If you want to perform complex cuts, knowing everything about the uses of a track saw is essential.

No Limit on Complex Miter Cuts

There are two reasons why people fear miter cuts. One- they’re complicated and require a lot of number-crunching. Two- miter saws have a certain limit, and you can’t get the cut you want beyond the said limit.

However, if you get a miter gauge for your track saw, you can break through the barrier imposed by a miter saw. So, just spend $100 and perform all the angular cuts you want.

Multi-Purpose

If the portability is the crowning feature of a track saw, versatility is a close second (very close indeed). The reason behind track saw’s burgeoning popularity is the ability to multi-task with it. Usually, a saw restricts you to a certain type/kind of cut.

However, the track saw allows you to perform a wide variety of cuts. Still, certain cut styles are beyond the reach of the ever-so-flexible track saw. For instance, the cuts performed by a chainsaw are exclusive to a chainsaw.

Safe to Use

Compared to most other saws, track saws are safer to operate. Track saws sit upon a guide rail that minimizes accidents.

If you maintain proper safety measures (e.g., wear goggles, gloves, and protective equipment), you should have no trouble whatsoever operating a track saw even if you’re a beginner.

Still, before you dive into action with your track saw, learn as much as you can about how it works. It’ll not only keep you safe from injuries, but it’ll also increase the lifespan of the track saw you’re using.

Finally, be on your guard when you’re operating heavy machinery.


FAQs

Now, let us take a look at some of the most frequently asked questions about the best circular saw track system.

  • What’s the Difference Between a Track Saw and a Circular Saw?

A track saw comes with the long track that sits in front of its setup. However, a circular saw does not have this track. In addition, a track saw can easily make cross-cuts, rip cuts, plunge cuts, and angular cuts, while a circular saw is capable of making only the cross cuts and the rip cuts.

  • Which Is the Best Track Saw?

A track saw that’s ideal for your use is one that meets your needs. It should be affordable, easy to use, and maintain. The saw should also be able to give you clean cuts without any hassle. I prefer the Makita SP6000J1 as it’s an all-around track saw.

  • How Do I Protect Myself When Using A Track Saw?

Make sure that you wear the right protective gear. You will need goggles, gloves, and work boots. Above all that, reading through the user-manual word by word will also play an important role.

  • What Are the Best Care Tips for Your Track Saw?

First, make sure that you replace any dull blade. You must read through the user manual and work with your track saw in line with the advice from the manufacturer. More importantly, take your time to understand the different nuances of the track saw. Learning the proper use of a track saw is the best way to make sure it stays in excellent condition.

  • Is A Track Saw Worth It?

Yes. If you are struggling with making straight but precise cuts, working with a track saw will be the ideal thing to do. Choose a model that suits your needs by following the buyer’s guide that I’ve created.

  • How Deep Can You Cut with A Track Saw?

It depends on the length of the blade. Let me give you a small cheat sheet-
If the blade is 6-1/2 inches- the cut depth should be 2-1/8 to 2 inches.
If the blade is 8-1/4 inches- the cut depth should be 2-3/4 inches.
If the blade is 4-1/2 inches- the cut depth should be 1-1/2 inches.

So, the equation here is simple. The bigger the blade, the deeper you can cut.

  • Is the Festool Track Saw Worth It?

Definitely. Festool is a reliable brand that manufactures high-end track saws. I’ve used Festool track saws, and they’re worth every penny. If you check my list, you’ll see that I’ve put down two Festool track saws. Why? Because they are that good!

And if you are wondering where to buy a Festool track saw from, you can always get one delivered to your doorstep from any online retail store or search for it in a nearby hardware shop.

  • Can A Track Saw Replace A Table Saw?

To a certain extent- Yes! A table saw is known for the impeccable rip cuts it can perform. However, you can get high-quality rip cuts with track saws as well. So, why would you even get a table saw? Well, the answer is- table saws excel at heavy-duty and quick rip cuts. You don’t have to reset the saw every time you perform a full rip cut.

  • Are Track Saw Tracks Universal?

Yes. Most track saw tracks or guide rails are compatible with all the different track saws. Especially, the high-end track saws work with any other high-end track system. However, if you want to get the most out of track saw, using a brand-specific guide rail is recommended.

  • How to Use A Track Saw?

The steps of using a track saw are as follows-

Set the track system according to the cut you want
Adjust the riving knife properly
Choose the depth of cut you need
Adjust the bevel if you’re looking for angular cuts
Use clamps to hold the track system in place
Position the track saw over the guide track
Hold the saw with both hands firmly
Release the plunge and use the trigger to start the machine
Let the track saw reach the desired speed
Move the saw over the track system, and voila

If you want a more in-depth guide on how to use a track saw, feel free to browse through the detailed article I’ve posted.

When All is Said and Done

Nowadays, people are moving towards multi-purpose power tools. That’s why a track saw has become the favorite of DIYs because it allows homeowners to perform a lot of different cuts with just one saw. It’s like killing two birds with one stone. The only difference is- the birds (or cuts) aren’t limited to two. It’s plenty.

The track saws I’ve listed in this article were tested, used, roughhoused by yours truly. So, I believe none of the saws on this list will disappoint you. However, every tool is only as good as its master and the project at hand. You can’t just use a track saw as a reciprocating saw or a chainsaw.

So, here’s the deal. Understand the type, nature, and extent of your project before you buy a track saw (or any other saw, for that matter).

Finally, I would like to crown the two champions from the list and bestow the title of the best track saw. Usually, I only choose one product, but I couldn’t help but select two this time.

If you want an all-around track saw that delivers excellent performance for a reasonable price, I’d recommend the Makita SP6000J1.

If you spare some extra cash, put your money on the FESTOOL 575387 TS 55 REQ-F-Plus. It’s an excellent track saw, albeit the cost is a bit high.

I hope this gargantuan article has quenched all your thirst regarding the best track saw system. If you want to know more, there’s a bunch of other informative articles on my website that you can look into. Peace out!

About Jose Wilson

Hi, I am Jose Wilson. I am an avid DIY woodworker. I love to try out new woodworking tools. In over 6 years I have tried several wood working tools including circular saws, table saws, chain saws, and jigsaw among the rest. My inspiration came from watching my dada work. I also learned that many people didn’t quite understand how to use these tools. Today, I have helped so many people to learn the use, benefits, and how these DIY woodworking tools operate. I have created a number of work-tools related posts, built websites, and developed social media pages. Follow me here to learn more.

Leave a Reply

Your email address will not be published. Required fields are marked *

Related Posts