Husqvarna 136 Problems
Do you need a trustworthy chainsaw for your outdoor projects? In such case, you may have noticed the Husqvarna 136 chainsaw. This model is well-known for its lightweight construction, making it a preferred option among DIY enthusiasts and homeowners who must take on activities like tree pruning, firewood cutting, and brush clearing.
The Husqvarna 136 chainsaw has a 2-stroke engine that produces 2.2 horsepower with a 16-inch bar and chain as standard equipment. It also has a centrifugal air cleaning system, which lessens the amount of trash and dust that the engine is exposed to, hence extending engine life.
This amazing Husqvarna chainsaw model is not without its drawbacks. Potential users of the Husqvarna 136 chainsaw may want to know what these drawbacks are and why they should consider them before making a purchase. It won’t be a smart buying decision to purchase an item without knowing the full story of any problems or issues you might encounter using that machine.
For the Husqvarna 136 model, a potential user may want to search for any problems or issues in the areas of performance, maintenance, safety, and comparison with other models.
Performance difficulties
The Husqvarna 136’s users may encounter issues with the machine’s performance, such as trouble starting the engine, subpar cutting performance, or stalling while in use. They might be looking for answers to these problems, such as instructions on how to increase the performance of the saw or troubleshooting manuals.
Issues with maintenance and repair
Users of the Husqvarna 136 may be looking for information on how to maintain or repair their saws. Chainsaws need regular maintenance to stay in good working condition. They might be looking for instructions on how to oil and clean the saw or swap out worn-out components like chains or sprockets.
Safety concerns
Users of the Husqvarna 136 may be looking for advice on how to use the saw safely because improper chainsaw use can be fatal. They may be seeking suggestions on how to use the saw safely or details on any safety measures it may offer.
Comparison with other models
Customers thinking about purchasing a Husqvarna 136 chainsaw may wish to compare it to other models available on the market. To make an educated choice, they could look up reviews or comparisons of saws that are similar to their own.
These are the areas and reasons someone might want to look for problems or issues affecting the Husqvarna 136 Chainsaw.
Read Also: Husqvarna 365 Problems and Fixes
Common Husqvarna 136 Problems
Using a Husqvarna 136 Chainsaw, there are several problems that you might encounter. But here are a few common ones, and what could be the possible cause of these problems and how to fix them. It is not certain that you’ll encounter any of these problems when using the Husqvarna 136, but these are just some of the more commonly experienced problems that most users have faced.
Problem 1: Starting Problems (Causes and Fixes)
Many difficulties might result in the Husqvarna 136 chainsaw not starting. Stale or tainted fuel in the chainsaw’s fuel tank is one typical culprit, which might make it challenging to start the engine.
A blocked air filter is another potential problem since it limits the airflow to the carburetor, which makes it more difficult to start the engine.
The engine may also be unable to start if one or more ignition system components, such as the ignition coil or spark plug wire, are defective.
A flooded engine, problems with the carburetor, and filthy or damaged spark plugs are further potential culprits.
It’s important to identify the underlying causes of beginning issues and then implement the proper solutions, which may require cleaning, repairing, or replacing parts as necessary.
Contaminated Fuel:
Fuel that is stale or water-contaminated may be problematic to start if it is in the chainsaw’s fuel tank. Fuel that is too old or contaminated might block the carburetor or fuel lines and make it difficult to ignite by losing volatile components, respectively.
How To Fix:
Check the fuel in the chainsaw’s tank to ensure it is clean and fresh. If required, drain the old fuel and replenish it with new fuel.
Clogged Air Filter:
If the chainsaw’s air filter is blocked with dirt, sawdust, or other material, it may be difficult to start the engine since less air will reach the carburetor.
How To Fix
Take off the air filter and give it a thorough cleaning with compressed air, or if it is too dirty or broken, replace it with a new one.
Dirty or Worn-out Spark Plug:
Spark plug that is unclean or worn out can result in a weak or inconsistent spark, which makes it challenging to ignite the gasoline combination in the engine.
How To Fix:
Take out the spark plug and look it over for wear or damage. If necessary, clean or replace the spark plug.
Faulty Ignition System:
A flawed ignition system, such as a damaged ignition coil or spark plug wire, can also result in starting issues by obstructing the spark’s path to the engine’s combustion chamber.
How To Fix:
Use a multimeter to check the ignition coil and spark plug wire for continuity. If necessary, swap out the problematic parts.
Read Also: Husqvarna 435 Chainsaw Problems & Maintenance Tips
Problem 2: Power Issues (Causes and Fixes)
Power issues are another common problem that faces the Husqvarna 136. Let’s look at the possible causes and solutions.
Clogged Air Filter:
The engine’s ability to produce power may be reduced if the airflow to the engine is restricted by a clogged air filter. This may occur as a result of the filter’s buildup of dust and particles.
How To Fix:
Clean or replace the air filter. To guarantee that the engine receives enough airflow, clean the air filter or replace it with a new one.
Dirty Spark Arrestor:
Having a filthy spark arrestor can also lower the airflow to the engine, which will decrease power. Accumulated carbon deposits on the spark arrestor may cause this.
How To Fix:
In order to guarantee that the engine can breathe freely, clean the spark arrestor or replace it altogether.
Fuel System Issues:
Problems with the fuel system can potentially cause power outages. Fuel flow may be constrained, and power output may be decreased if the fuel filter or carburetor is unclean.
How To Fix:
To guarantee sufficient fuel flow to the engine, clean the fuel filter or replace it with a new one. It could be necessary to clean or rebuild the carburetor if it is clogged.
Related: Husqvarna 372XP Problems
Problem 3: Chain Brake Failure (Causes and Fixes:)
Worn or Damaged Chain Brake Band:
A worn-out or damaged chain brake band will cause the brake from engaging or disengaging properly. Thereby causing brake failure.
How to Fix:
You’ll need a new chain brake band and a tool to remove and replace it in order to repair a worn or damaged one in your Husqvarna 136 chainsaw. After disassembling the chainsaw, replacing the old brake band with the new one and putting it back together. Check the brake’s functionality by testing it.
Malfunctioning Chain Brake Spring:
This can also lead to failure because if the chain brake spring malfunctions, the chain brake won’t disengage and engage properly.
How to Fix:
Replace the old spring with a new one after carefully removing the old one. To locate the spring, remove the chainsaw cover.
Loose or Damaged Chain Brake Handle:
From consistent use over time, the chain brake handle can become loose or damaged. Working with a damaged or loose chain brake handle will lead to brake failure.
How to Fix:
To reach the brake handle mechanism, first take off the side cover of the chainsaw. After that, tighten any slack screws or nuts holding the handle in place. If the handle is irreparably broken, you can buy a replacement handle and install it by following the same instructions. Before operating the chainsaw again, make sure you test the brake handle to make sure it is functioning properly.
Dirty or Blocked Chain Brake Mechanism:
If your chain brake mechanism is dirty or blocked, it could lead to chain brake failure.
How to Fix:
You can use a brush and air pressure to clean the chain brake mechanism on a Husqvarna 136 chainsaw if it’s clogged or unclean. Remove the side cover first, then remove any debris with care. After that, use compressed air to blow away any leftover dirt. Reassemble the brake handle, then test it.
Read More: Husqvarna 120 Mark II Problems
Problem 4: Oil Leakage (Causes and Fixes)
Let’s look more closely at some of the most typical causes of oil leaks in chainsaws and how to remedy them. Oil leaks can occur for a variety of reasons.
Damaged Oil Tank or Oil Cap:
A cracked oil tank or lid is one potential reason for oil leaks. Oil may leak out of the chainsaw as a result of brittle, cracked plastic on the oil tank or lid over time. If so, you will need to buy a new part to replace the broken one.
How to Fix:
To fix this, simply remove the old oil cap and replace with a new one.
Damaged Oil Pump or Oil Line:
If the oil pump or line is cracked or broken, it can cause oil to leak out of the chainsaw.
How to Fix:
Fixing this is much like how you’ll fix a damaged Oil Cap. You just have to buy a new one to replace the old one to stop the oil leakage if this is the cause of the oil leakage.
Clogged Oil Filter:
It is very likely the chainsaw’s oil filter is the culprit of the oil leakage. Over time, the oil filter can become clogged or damaged, causing the oil to leak out of the chainsaw.
How to Fix:
You can clean the oil filter to take out any dirt or debris that has accumulated over time, if this does not work, then you’ll have to replace the old one with a new one.
Read: Husqvarna 572XP Problems
Problem 5: Carburetor Issues (Causes and Fixes)
Dirty or Clogged Carburetor:
Over time, dirt and debris can clog the carburetor, resulting in poor engine performance or failure.
How to Fix:
Remove the carburetor and properly clean it using carburetor cleaning to resolve this issue.
Carburetor Needle Valve Issue:
Incorrect fuel mixes and subpar engine performance might be brought on by a broken or worn-out carburetor needle valve.
How to Fix:
Replace the needle valve with a new one to resolve this problem.
Carburetor Air Leak:
A carburetor air leak can make the engine run lean, which can lead to overheating and, ultimately, engine failure.
How to Fix:
In order to resolve this problem, check the gaskets and seals on the carburetor for wear or corrosion and replace them as necessary.
Related: Husqvarna 550 XP Problems
Troubleshooting Tips
Below are a few troubleshooting tips you can use if you’re experiencing any of the common problems with your Husqvarna 136 chainsaw.
- Checking the spark plug: this will help to troubleshoot starting issues or power issues you may be having with your Husqvarna chainsaw.
- Inspecting the air filter: You can do this when you’re experiencing power issues with your chainsaw, either it’s not starting, or it’s not working at its optimal capacity.
- Adjusting the carburetor: This is for any carburetor issues you may be experiencing with your chainsaw. Locating the carburetor and adjust it a little can help to salvage the situation.
- Cleaning the fuel filter: This will help to tackle a lot of problems you might face with the Husqvarna 136 chainsaw, for example, oil leakage.
Preventing Husqvarna 136 Problems
As much as these problems are common problems, they can be prevented and avoided. Let’s look at some of the ways to prevent some of the problems users face with the Husqvarna 136 chainsaw.
If you want to avoid some of the problems with the Husqvarna 136 chainsaw, you should practice the following; regular maintenance, proper storage and correct fuel and oil mixture usage.
The most important thing is frequent maintenance. This includes performing tasks like polishing the chain and sharpening the spark plug, as well as cleaning the air filter. You can guarantee that your chainsaw keeps working effectively and doesn’t experience any unneeded wear and strain by keeping it in good shape.
Together with routine maintenance, proper storage is essential. When not in use, keep your chainsaw in a dry, cold location away from any heat or moisture sources. This will assist in avoiding rust and other types of damage that could shorten the life of your chainsaw.
Lastly, it’s crucial to use the right gasoline and oil ratio. Husqvarna advises mixing unleaded gasoline and 2-cycle oil 50:1. Using the incorrect fuel or oil might harm the engine and shorten the chainsaw’s lifespan.
You can extend the life of your Husqvarna 136 chainsaw and keep it in excellent shape by using these straightforward suggestions. Don’t be afraid to ask a professional for help or guidance if you have any questions or concerns.
Conclusion
If you own or intend to own a Husqvarna 136 chainsaw, it’s essential you’re aware of some of the common problems that you may experience or be experiencing and how to deal with them. Some of the common problems include; Starting problems, power issues, chain brake failure, oil leakage, and carburetor issues.
Regular chainsaw maintenance, such as air filter cleaning, spark plug inspections, and chain sharpening, is essential to avoiding these issues. Also, it’s crucial to store your chainsaw safely while it’s not in use and to use the proper gasoline and oil ratio.
It’s best to address Husqvarna 136 chainsaw issues as soon as you discover them to avoid further damage or potential safety risks. Moreover, you may talk to other Husqvarna 136 owners about your experiences and give any extra advice or fixes that have worked for you.
Keep in mind that proper maintenance may extend the life of your chainsaw, avoid problems, and guarantee years of safe and effective use.
