Husqvarna 372XP Discontinued
A few years ago Husqvarna decided to cease the production of the 372XP chainsaw. And understandably, a lot of users were upset over this! That’s why we’re going to attempt to uncover the reasons why the Husqvarna 372XP was discontinued.
It appears that after 2018, Husqvarna 372XP production ceased. The Husqvarna 572XP took its place because it’s more reliable, effective, and user-friendly while also costing roughly the same as the 372XP.
Continue reading to learn more about the broader legitimacy of Husqvarna’s approach to the 372XP discontinuation. At the closing, we will additionally enlighten you about the 572XP.
Possible Reasons to Discontinue 372XP
The Husqvarna did not specify the reasons for the cancellation of the 372XP. However, we ran extensive research and discovered several plausible explanations that you should explore. They are listed below.
- Stops Running
The Husqvarna 372XP is a powerful chainsaw that is widely used for a variety of tasks. But one of the key reasons for its discontinuance was that it frequently stalled during cuts. This can be frustrating for users, as it requires the saw to be run at full throttle in order to keep it running.
It could put stress on the operator and reduce the saw’s effectiveness. Many users have reported this issue, which can significantly impact the overall performance of the chainsaw.
- Not Sturdy
Yes, we all agree on the fact that the Husk 372XP is a reliable chainsaw. However,
it’s not as durable as some of the more modern chainsaws on the market which is another major reason for its discontinuance.
The 372Xp lacks certain features, such as air/fuel mixture control and a strong filtering system, that protects the saw and extend its lifespan. On the other hand, modern chainsaws usually include these and other features that increase their durability and longevity.
After all, no one feels it pleasant to take extra precautions to protect a saw.
- Low Power
If you’re someone who needs a lot of power and speed when using a chainsaw, then the Husqvarna 372XP might not be the best option for you. It’s not that this chainsaw is completely useless, but compared to newer models, it just doesn’t have as much oomph.
The 372XP only has a speed of 9600 rpm, which is pretty slow compared to something like the 572XP, which has a speed of 9900 rpm. So, if you’re trying to get a lot of wood cut in a short amount of time, you might want to look into a different chainsaw.
- Doesn’t Restart
So, the 372XP chainsaw has a big problem with restarting. Like, when you turn it off and then try to start it again, you have to put it in half choke or it won’t start. It’s the same issue this user faced!
And that’s just a major hassle which can be one of the reasons this chainsaw has been discontinued.
- Engine Get Flooded
One of the worst things about the 372XP chainsaw is that its engine gets flooded frequently when you try to start it up again. It’s such a pain because it takes forever to clear the flooded engine and get the chainsaw going.
And it’s not just a one-time thing, it happens all the time after using it for a year or two.
- Chain Brake
The chain brake of Husk 372XP is super stiff and you have to really yank on it to get it to work. And even when you do, you can feel the brake band lift off the clutch drum as you push it back. It’s just a huge hassle to use.
To be honest, it’s not exactly user-friendly when you have to struggle with the brake every time you want to use it.
How is the Husqvarna 572XP a Good Replacement for 372XP?
If you’re a 372XP chainsaw lover, it’s fair for you to ask how the 572XP beats it.
Well, while both models are 70cc, the 572XP has a number of significant upgrades that make it an even better choice.
For starters, the 572XP has a lower vibration level and a more balanced body, which makes it much easier to handle and maneuver. This is especially important if you’ll be using the chainsaw for long periods of time or if you have to make precise cuts.
In addition to this, the 572XP has an improved filtration system and better cooling capacity, which helps to increase its durability. But perhaps the biggest advantage of the 572XP is its powerful 9,900 RPM speed, thanks to its impressive 5.8 hp engine. This is significantly higher than the 372XP, and it means that the 572XP can handle tougher jobs with ease.
All things considered, it’s clear that the Husqvarna 572XP is an excellent replacement for the 372XP. So, if you’re looking for a high-quality chainsaw that can handle anything you throw at it, the 572XP is the way to go.
Read Head To Head Comparison of- Husqvarna 372xp Vs 572xp
FAQs
What kind of task is 372XP better suited for?
The Husqvarna 372XP is a top choice for professional bucking, felling, and tree care due to its impressive power and performance.
What size of the bar is best suited for the Husqvarna 372XP?
The best bar size for the Husqvarna 372XP is 20 inches to 24 inches, with 24 inches being a particularly good fit. It allows the chainsaw to run smoothly and efficiently without putting too much strain on the engine.
What is the horsepower of a 372XP?
The Husqvarna 372XP is a powerful chainsaw that boasts 5.2 horsepower. It provides plenty of power for a homeowner to do light work.
In Conclusion
It’s definitely a bummer that the Husqvarna 372XP discontinued since it was a top-notch chainsaw that many homeowners relied on. But don’t worry, there’s a fantastic option out there from Husqvarna that’s worth considering and it’s the 572XP.
In fact, many people actually think it’s an even better choice than the 372XP. Why? Well, it has a longer lifespan and is more powerful than the 372XP. Plus, it’s super easy to use, which makes it a great option for people of all skill levels.