Stihl MS 362 VS Husqvarna 562XP: [Complete Comparison]

A chainsaw is a handy tool that people use for more than just cutting firewood. Their obvious uses of this include cutting down branches and trees, turning logs into lumber, chopping firewood, sculpting foliage, etc. Since chainsaws are a bit pricey, we’re pretty careful when it comes to choosing them, right?

Both Stihl MS 362 and Husqvarna 562XP are true professional chainsaw models people have been using for a long time. Everyone is a bit confused about choosing between these two models for professional use. This is because both have several advantages and some disadvantages as well.

In this article, I will discuss the differences, advantages, and disadvantages of these two chainsaw models in detail. From there, you can easily determine which chainsaw model will be perfect for you.

At the outset, I would like to present a quick comparison table. If you are experienced with chainsaws, this may be enough for you. Let’s begin.

 Quick Comparison Table: Stihl MS 362 vs Husqvarna 562XP

quick comparison table

This table will reveal some basic information about the Stihl MS 362 and Husqvarna 562XP chainsaws. From this, the differences between the two will become obvious.

Key Factor Stihl MS 362 Husqvarna 562XP
Displacement 59.0 cc 59.8 cc
RPM Not specified 9600
Power output 4.6 hp 4.7 hp
Powerhead weight 12.3 lbs 13.4 lbs
Recommended Guide bar length 20 inches 18-20 inches
Fuel tank capacity 20.3 oz Not specified
Chain oil volume 11 oz 11.15 oz
Chain type RS3, 3/8″ C83/C85, 3/8″
Sound power level 119 dB(A) 118 dB(A)
Vibrations 5,6 m/s² 3.2 m/s²
Power source Gas Gas
Price CHECK LATEST PRICE CHECK LATEST PRICE

Differences Between Stihl MS 362 And Husqvarna 562XP: [In-Depth Review]

Both the Stihl MS 362 and Husqvarna 562XP are excellent wood-cutting tools. Here, I will explain the differences between these chainsaws in detail. In most cases, these differences are very subtle. Hope you can understand easily.

  • Sprocket And Clutch Mechanism

sprocket and clutch mechanism

You will notice some structural differences between the two chainsaws with the sprocket and clutch mechanism. The Stihl MS 362 features the inboard sprocket and internal chain brake that you typically see on most Stihl chainsaws.

The Husqvarna 562XP, on the other hand, has a chain brake inside the side cover. This model chainsaw has an outboard sprocket and clutch mechanism. The advantage is that the heat generated does not reach the main bearings or the motor and is easily dissipated outwards, so the chainsaw heats up less.

However, this difference may not make much of a difference in the performance of the chainsaws. Although there is a structural difference, the MS 362 is not adversely affected by having an inboard sprocket and internal chain brake.

Read Also: Stihl MS 362 Problems

  • Handlebar

handlebar

You can notice some differences in the handle design of both chainsaws. The company uses plastic handlebars on the MS 362 chainsaw, which heats up less. However, these types of handles are prone to breakage.

The Husqvarna 562XP chainsaw has an aluminum handlebar. These types of handlebars are stronger than plastic handlebars and, although prone to bending, are much less likely to break. However, these handlebars can get a bit hotter in comparison.

  • Interior Accessing Process

interior accessing process

The interior of chainsaws often accumulates dirt. As a result, sometimes we have to open the top cover and clean the dirt. The Stihl MS 362 has three screws to open the top cover. Place the chain brake in the engaged position after loosening the screws using a screwdriver and lift off the top cover.

With the Husqvarna 562XP, the process is simpler. Instead of screws, these chainsaws have a locking mechanism. You can easily open the locks using a flathead screwdriver or similar. At this stage, put down the chain break and remove the top cover.

  • Fuel Tank Capacity And Consumption

fuel tank capacity and consumption

Fuel tank capacity and fuel consumption can be important considerations, as the higher the capacity, the longer the chainsaw can operate alone. Besides, if consumption is less, it will definitely contribute to saving.

Stihl MS 362 has a fuel capacity of 0.6 liters and a fuel consumption of 0.9 l/h at 30% load. Husqvarna 562XP has a fuel capacity of 0.65 liters and a consumption of 3.84 lbs/h. Husqvarna claims this model of chainsaws can save up to 20% on fuel.

  • Cylinder Design

cylinder design

The Stihl MS 362 chainsaw has a conventional 90-degree cylinder setup, while the Husqvarna 562XP has a 45-degree cylinder setup. According to Husqvarna, this cylinder setup can be much faster, which can improve the chainsaw’s performance.

Also, the MS 362 chainsaw has 2 piston rings that allow the engine to hit less. Husqvarna 562XP has 1 piston ring, which is why its engine runs faster and hotter.

  • Engine And Power Output

engine and power output

Engine power is an important consideration in chainsaw selection. Although the engine power of both chainsaws is almost equal, the Husqvarna 562XP will be slightly ahead in this regard.

The Stihl MS 362 chainsaw has a 59.0 cc engine that outputs 4.6 hp of power. The Husqvarna 562XP chainsaw, on the other hand, has a 59.8 cc engine that outputs 4.7 hp of power.

  • Weight

weight

The weight of the chainsaw plays the most significant role in operating it in a convenient way. Heavy weight makes it difficult to operate, especially for those who operate the chainsaw regularly or for long periods of time.

In this regard, the Stihl MS 362 is slightly more convenient. Their powerhead weighs 12.3 lbs. On the contrary, the Husqvarna 562XP is relatively heavy. The powerhead of this chainsaw weighs approximately 13.4 lbs.

You can also watch the video below to understand the difference between both chainsaws.

Pros and Cons Of The Stihl MS 362 and Husqvarna 562XP

pros and cons stihl ms 362 and husqvarna 562xp

I have detailed the notable differences between the two chainsaws above. Also, I think it’s important to understand the pros and cons of both chainsaws. These will help us decide on the choice of a chainsaw according to our needs.

Pros and Cons of Stihl MS 362

Pros
  • A brilliant combination of power and weight
  • Improved efficiency
  • Available with modern technology
  • Comparatively lightweight
  • Durable
Cons
  • Lack of features like feeling marks
  • Somewhat pricy

Pros and Cons of Husqvarna 562XP

Pros
  • Less fuel consumption, saves money
  • More powerful
  • Available with advanced technology
  • Lower vibration
  • Ensures efficient cutting
  • Long-lasting
Cons
  • Lacks heated handles
  • A bit heavy

Read Also: Husqvarna 562XP Problems

Which Is The Best Chainsaw For You? 362 Or 562XP?

In fact, both chainsaw models are highly effective, time efficient, long-lasting, and popular. If we review the features, pros, and cons of both Stihl MS 362 And Husqvarna 562XP chainsaws, Husqvarna 562XP is definitely ahead.

However, which one is best for you will be determined based on your needs, as not everyone will have the same purpose for using a chainsaw. The company developed Stihl MS 362 chainsaw for professional de-limbing, bucking, and felling.

Besides, Husqvarna 562XP has been developed for professional logging. So your needs will tell which chainsaw is best for you. But this is for sure, you won’t be fooled by buying either of these two.

husqvarna 562xp chainsaw

Husqvarna 562XP [WINNER]

Check Latest Price

Frequently Asked Question Regarding The Stihl MS 362 VS Husqvarna 562XP

How Big Of A Guide Bar Can You Put On A Stihl 362 And Husqvarna 562XP?

The company recommends using a 20-inch guide bar on the Stihl MS 362 chainsaw. However, many users also use 16 to 25-inch guide bars on these models. Furthermore, the company recommends using an 18- to 20-inch guide bar on the Husqvarna 562XP chainsaw. In practice, many users use guide bars ranging from 18 to 28 inches.

Which Is Easier To Handle Between Stihl MS 362 and Husqvarna 562XP?

A chainsaw needs to be light and low in vibration for easy handling. The Stihl MS 362 is relatively light but produces a bit more vibration. Husqvarna 562XP weighs a bit more but vibrates less. So you have to decide which chainsaw will be easier for you to operate!

Which Is Faster Between Stihl 362 And Husqvarna 562XP?

Both chainsaws cut excellently. However, when considering engine capacity and torque, the Husqvarna 562XP will be ahead, although this will vary by operator. The video below will let you know better about this.

Final Verdict

Both the Stihl MS 362 and Husqvarna 562XP chainsaws come with boatloads of convenience. The use of advanced technology and modern features have made chainsaws famous. You can choose both chainsaws for professional work.

For perfect selection, you must make a comparison between the two. I have detailed the highlighted differences between both chainsaws here. Hope this helps you make the right decision by focusing on your needs.


Read More:

Leave a Reply

Your email address will not be published. Required fields are marked *